Friday, March 29, 2019

Operation: Like My Dog / Beauties Pageant 26

I completed this bassinet project well in time for Easter giving.

There’s a canine roaming the halls of From Bolt to Beauty world headquarters. Her name is Rose, and she’s a high-energy golden retriever. She’s a lover, not a fighter, and if burglars broke into my house, the worst she could do is lick them to death.

To my three-year-old niece, however, Rose is scary. Rose towers over this sweet little girl, and with every bark, my niece runs into my sister’s arms, pleading, “I need you!” The relationship between Rose and my niece affects every family visit, and that was the impetus for Operation: Like My Dog.

First, I showed up at my niece’s third birthday party with a gift specifically from Rose. It was a small golden retriever stuffed animal, and Rose Puppy, as this creature has been named, has the privilege of sleeping in my niece’s bed every night (along with, like, 20 other stuffed animals). Then, for Valentine’s Day, Rose sent my niece a card signed with a paw print stamp. (My husband thought it was ridiculous that [1] I own a paw print stamp and [2] I signed a card with it. I thought it was brilliant!)

Later in February, my niece and sister visited for a few days to watch my boys while I went to QuiltCon. My sister noted significant progress. She said that my niece was much calmer around Rose, even when Rose was barking. One night, as the kids were getting ready for bed, my niece walked over to Rose’s crate, said a big good-night, and then crouching closer to the dog whispered, “I love you.”

Rose and my niece have come so far—I don’t want to lose any ground!—so when I saw the sweet bassinet Bernie (Needle and Foot) made for her granddaughter’s dolls, I started plotting my own for my niece from our dog.

I took the opportunity to use up a yard of garden novelty fabric that features springy colors and bunnies hiding in watering cans ...


Because I didn’t know when I would have another occasion to use this fabric, I used as much as I could in this project—on the exterior, as the lining, and in a simple coordinating doll quilt.


This stuffed bunny will accompany the bassinet to its new owner. Fingers crossed that Miss Hopsy will join the chosen few in my niece’s bed at night! : )


To make your own doll bassinet, visit the tutorial on Sew Mama Sew!

If you have other ideas of what Rose can do for my niece—crafty projects and otherwise—please let me know in the comments.

* * *


The pageant rules are simple:
  • Post your finish in the linky tool. (No links to your own giveaway or linky, please!)
  • Point your readers back here with a text link or use the button above.
  • Visit and comment on other participants’ finishes.



Follow on Bloglovin

Thursday, March 28, 2019

Fab Five Ruler Remix


I am always looking for small projects to intersperse among all the quilts I have in the works. Quick projects like a pouch or bag give me the thrill of a finish without the time commitment of a quilt.

So when the Fat Quarter Shop offered to send me a Fab Five Ruler and pillow pattern to try out, I responded with an enthusiastic yes. A pillow project was just what I needed to get out of my current quilty doldrums!

This ruler, created by Abbey Lane Quilts, makes cutting out tumbler shapes easy. Using bits of various Alison Glass lines, I auditioned a few different layouts and asked Instagram friends for feedback. I decided on a rainbow-like gradation with what I consider to be a more modern tumbler layout. (Instead of orienting my tumblers so that short ends of blocks line up with long ends, I laid them out so that short ends butt up to short ends and long ends butt up to long ends.)


To finish my pillow off, I quilted it and bound it in the same way I bind my quilts. I love how the dark gray Alison Glass print frames and unifies the patchwork!




To see others’ pillow projects, head to the Jolly Jabber, the Fat Quarter Shop’s blog. If you have a favorite FQS project, I would love to hear about it in the comments. I have sewed along in the past. Check out my Bring on the Dancing Horses Quilt, Mini Charm Mix Table Runner, and Odori Quilt.

For more on my experience matchstick quilting this project, look for a post next week. : )

Linking up to Confessions of a Fabric Addict, Busy Hands Quilts, and Needle and Thread Thursday ...

Pssst ... I’ll also be linking this bit of loveliness to the new monthly finish linky at Meadow Mist Designs, slated to launch on March 31.



Follow on Bloglovin

Friday, March 22, 2019

Let's Build a Wall / Beauties Pageant 25

My husband and I built our house—replete with high ceilings, a cavernous foyer, rooms whose beginnings and endings aren’t always clearly defined—almost 17 years ago. It’s a beautiful, open-concept design but has proved to be less functional than we’d like. In particular, the living room and dining room should be adult spaces that we use at night. Because sound travels easily from those rooms up to where the kids sleep, however, we don’t. The solution? We’re erecting a wall with noise-dampening insulation and adding two doors.

Someday soon there will be a wall and door here.

This plan is brilliant for a variety of reasons. First, we can get rid of a gate that keeps Rose, our naughty golden retriever, out of the dining room. (My lower back is already anticipating a day when I don’t have to step over that blasted thing!) Second, the living room and dining room are where I sew, and the renovations will better delineate my creative space from the rest of the house.

In the meantime, I’m squatting in a corner of the master bedroom on a fold-up table, trying to be as productive as possible. The sacrifice is that I have three projects ready to be quilted but no time to get to the longarm at my local quilt shop and no dining room table on which to spread out and work my magic. I’m considering doing some free-motion quilting in my temporary space. Someone—please!—talk me out of it!

When I am sewing at the dining room table, I smile. When I sew in the cramped
and dark corner of my bedroom, not so much.

How are things in your sewing space? Are you at peace with the happy place you’ve carved out of your home, or are you plotting improvements like reorganizing your supplies, improving your lighting, or erecting a wall? Praise or pout in the comments below.

* * *

And now it’s time for this week’s Beauties Pageant! (Note my own contribution: a link to Rose with an old whole-cloth finish. It’s included solely to indulge all you crazy dog lovers. You know who you are.)


The pageant rules are simple:
  • Post your finish in the linky tool. (No links to your own giveaway or linky, please!)
  • Point your readers back here with a text link or use the button above.
  • Visit and comment on other participants’ finishes.




Follow on Bloglovin

Monday, March 18, 2019

Sew-Along Prize Linky


A big thank-you to all of you who read or sewed along in the Cargo Duffle Bag event of the past few weeks. It’s been a lot of fun to share in the triumphs of those of you who were new to bag making or had been plotting to sew this pattern and just needed a little nudge. I can’t wait to see what everyone has made!

The Prizes

Three lucky Cargo Duffle makers will win a $30 gift certificate to the Fat Quarter Shop or one of two mystery packages from Anna Graham of Noodlehead, each with a pattern and the necessary supplies to make the project. (For my full post on the prizes, click here.)

Edit (4/4/2019): This giveaway is closed. The winner of the FQS gift card is Shena, and the winners of the Noodlehead prize packages are Kim and Amy!

Winners will be picked at random from the linky (see below) that will run through March 31, 2019. This prize draw is open internationally. If someone outside of the United States wins one of the Noodlehead prizes, he or she will be emailed a gift card from the online retailer of his or her choice in lieu of the package from Noodlehead. (It’s just too darn expensive to ship stuff internationally.)


A Look Ahead

Gosh, I’d love to sew along again with you all. Maybe we can reconvene this fall for more bag making? I realized I own—ahem!—three Noodlehead patterns that I have yet to make: the Super Tote, the Go Anywhere Bag, and the Caravan Tote. Then there’s the Forage Bag, which, like the Cargo Duffle, is offered free on the Robert Kaufman site. Any preferences on what we tackle next? Let me know in the comments.

And of course, if you couldn’t sew the Cargo Duffle along this time, the posts regarding each step will always be available here on From Bolt to Beauty.

* * * 

Bring out your lovely Cargo Duffles, friends!




Follow on Bloglovin

Friday, March 15, 2019

Pillow Parade / Beauties Pageant 24


I make a lot of presents—gift giving is one of my favorite parts of sewing and quilting—and many of the future recipients of said presents keep close tabs on me via social media. This means I have a surplus of finishes that I can’t yet reveal, for fear that those friends will catch wind of what I have made for them. One of these projects is a swoon-worthy Alison Glass pillow with matchstick quilting. So. Very. Pretty.

It seems mean to tease like that without providing a picture (or five), but there are some pretty cool pillows in the From Bolt to Beauty archives we can talk about.

I sewed this orange peel pillow back when I took the Curves Class at Stitched in Color. It still graces my bed (on days when I make my bed!) ...


These simple-yet-sturdy envelope pillows are testament to what you can do with a little home dec fabric and fusible fleece ...


And the hexagons below, along with those at the top of the post, are pillow perfection.


Pillows are great small projects. I wish I could make more for myself, but pillows in the hands of two little boys often become projectiles or objects with which to hit one’s brother/dog/mother.

I have thoughts on pillow construction, however, which I look forward to sharing with you in the near future. : )

* * *

If you have a finish this week—in pillow form or not—we’d love to see it. Add it to this week’s Beauties Pageant!


The pageant rules are simple:
  • Post your finish in the linky tool. (No links to your own giveaway or linky, please!)
  • Point your readers back here with a text link or use the button above.
  • Visit and comment on other participants’ finishes.




Follow on Bloglovin

Thursday, March 14, 2019

Sew-Along Day 6: Lining the Bag

Welcome to the final day of instruction for the Cargo Duffle Sew-Along! Today you’ll learn how to add a lining to your bag. It’s my own alteration to the pattern, so if you have any additional thoughts about how to approach this step, please share them in the comments.

Also: Remember to come back and submit a picture of your finished bag sometime between March 18 and March 31 to be eligible for a prize. (Eep! I can’t wait to see everyone’s finishes!)

Sewing the Lining Pieces

Back on day 1, you cut these pieces from your lining fabric:
  • Front/back: (cut 2) 10.75" x 18.25"
  • Bottom gusset: 6.5" x 29.5"
  • Zipper gusset: (cut 2) 3.25" x 27" 
You will sew them together as you assembled the gusset and bag back on sew-along day 4 and day 5.

First, take your two zipper gusset strips, and fold each of them under a half inch along one long edge. Press. Align those strips with the edges of the bottom gusset, right sides together, and pin. As you can see from the picture below, there’s a gap in the middle. (Please note: the gap in these pictures will look bigger than your gap. I altered the dimensions so you will get a better fit than I did while I was testing the lining instructions.)


Sew each of those strips at the short end, backstitching when you start and stop, as indicated in the picture below. Align on the other side and repeat with pinning and sewing.


Now you have a floppy but complete lining gusset!

Continue with the steps you followed to make the bag itself: Take the gusset and the front and back panels. Mark the dots that Anna instructs you to make in step 5 of the pattern. Sew the gusset to the the top and bottom edges of one panel. Make a slit at the corners (see picture below) as you did while assembling the main bag, per my advice on day 5. Sew the sides. Then repeat with the second panel.


I like to press the seams open the best I can at this point.

Sewing the Lining into the Bag

Next, insert the lining (wrong side out) into your bag. Align the folded-under edges of the lining with the edge of the canvas that abuts the zipper. Use whatever works for you! I resorted to Wonder Clips *and* pins.


Get as close as you can to the zipper tab ...


Now, sewing right on top of the line of edge stitching that runs along both sides of your zipper, sew the lining to the bag. Go slowly.

You will see from the pictures that follow that I used a regular foot; the design of my walking foot couldn’t get me close enough to the zipper. Do whatever works for you. Also: I used a bobbin thread color that matches my lining.



Whenever I encounter a messy point in my sewing here, I simply stop, rip out the problematic stitches, and start back up by back stitching and continuing on my way. It’s not elegant, but it works.

You will have to stop before you get to the end of the zipper. The next picture is not great, but it shows how there’s a small gap on the right side between the lining and bag at the end of the zipper. (There is also one, not shown, on the left.) I sewed as far as my machine would allow and then just backstitched at the end.


Adding Some Tacking Stitches

To get the lining to sit better in the bag, I tacked it down with my machine at the four top corners of the bag. In other words, I found a line of quilting near each corner on the top of the exterior and sewed through both the lining and bag at those points. Three stitches forward, three stitches back, three stitches forward. Because I followed an existing line of quilting, these tacking stitches are not really visible from the exterior, but they look like this from the lining side ...


Yours may be in a slightly different location. It doesn’t matter: they’re functional; no one will see them. You could try to do these stitches by hand. I couldn’t get a needle through my canvas.

What these four sets of stitches do is prevent the lining from just flopping around the interior of your bag. It’s almost as if, between the two lines of stitches along the zipper and the tacking stitches, the lining hangs inside the bag.

If you’ve made it this far, good for you! You are the proud maker of a lined Cargo Duffle Bag!

If you have any questions or comments, the best way to share them with me and everyone else sewing is to use the comments below, but you can also email me at frombolttobeauty (at) gmail (dot) com or DM me through Instagram.

Document your progress on Instagram using the hashtag #cargodufflesewalong!

Related Links:
Main Cargo Duffle Sew-Along Page
Sew-Along Day 1: Cutting the Pattern Pieces
Sew-Along Day 2: Making the Cargo Pockets
Sew-Along Day 3: Quilting and Assembling the Exterior Panels
Sew-Along Day 4: Making the Gusset, Tabs, and Handles
Sew-Along Day 5: Assembling the Bag and Installing the Snaps
>Sew-Along Day 6: Lining the Bag<
Prize Linky

Follow on Bloglovin

Tuesday, March 12, 2019

Sew-Along Day 5: Assembling the Bag and Installing the Snaps

Things are about to get exciting. Today you’ll assemble the various pieces of your duffle and install the snaps. By the end of these steps, you’ll have a legit bag.

A Few Words of Wisdom

First, if you haven’t moved up to a size 16 needle yet, you should do so now. There’s some serious bulk coming your way.

Basting the handles is super straight forward. Line up the raw edges of the handles with the raw edges of the exterior panels. Wonder Clips are your friend here.


Since you’ll be using a half-inch seam allowance to construct the bag, there’s wiggle room. See how my quilting cotton doesn’t reach the edge of the canvas in the picture below? No one will know—that shortage will be hidden by the seam allowance.


Cutting a Slit in the Corners

My biggest tip on assembling the bag pertains to Anna’s step 5(d), where you’re doing some dot-to-dot sewing. Once you sew the top seam, per her instructions, your bag will look like this, an awkward mass of fabric ...


When it was time for me to sew my sides, my Wonder Clipped seam looked like the picture below. It was puckering pretty badly. I was setting myself up for heartbreak and unsewing.


My solution? I clipped a slit in each corner of both exterior panels when I got to this point with them ...


The slit doesn’t go through to the seam itself, and that little flexibility allows me to twist the edge enough to get the pieces to lie better—flatter—than without it. Check this out ...


There’s still a big of bumpiness on the left side, but it didn’t prove to be a problem.

Installing the Snaps

Installing the snaps intimidated me so much with my first Cargo Duffle Bag that I used my bag for almost two years without any snaps on it at all. I loved my duffle so much—I didn’t want to mess it up by being sloppy with the snaps. When I finally got the courage to install them, however, it was no big deal. The best guidance I can give you is to practice by installing a snap on some scrap fabric. Doing might give you the assurance it gave me to install snaps successfully.

The snaps and installation tool you bought should have a blow-by-blow of how the pieces work together. (Anna also has a great tutorial on the process.) My recommendation is to mark where things should go before you start poking holes in your beautiful pockets. Specifically, first mark where you want the caps—that is, the visible part of the snaps—to go on your flaps. (Mine are about 1 inch up and 1¾ inches in from the side of the flap.) Using the tip of a pair of sharp scissors, create tiny holes to push the post of the cap through. Then poke a fabric marker through those holes to mark where the second half of the snap should go.

My first set of marks for the caps.

These marks ensure that my studs line up with the caps. Phew!

If you’re wondering whether it would have been easier to install the snaps earlier in the duffle-making process, it might be. For your first Cargo Duffle, however, I’d follow Anna’s advice. When the bag is assembled, you get a better idea of how the flaps and pockets will hang on the finished bag. Working with the exterior panels before assembling with the gusset might yield a tighter fit between the flaps and pockets and might limit how much stuff you can store in your pockets. (Does that make sense?!)

That being said, for my Cargo Duffles #3 and #4, I installed the snaps earlier—but I also had a better grasp of the pattern than I did with my first duffle.

If you have any questions or comments, the best way to share them with me and everyone else sewing is to use the comments below, but you can also email me at frombolttobeauty (at) gmail (dot) com or DM me through Instagram.

Document your progress on Instagram using the hashtag #cargodufflesewalong!

Related Links:
Main Cargo Duffle Sew-Along Page
Sew-Along Day 1: Cutting the Pattern Pieces
Sew-Along Day 2: Making the Cargo Pockets
Sew-Along Day 3: Quilting and Assembling the Exterior Panels
Sew-Along Day 4: Making the Gusset, Tabs, and Handles
>Sew-Along Day 5: Assembling the Bag and Installing the Snaps<
Sew-Along Day 6: Lining the Bag
Prize Linky

Follow on Bloglovin

Monday, March 11, 2019

Sew-Along Day 4: Making the Gusset, Tabs, and Handles

There’s a lot on our to-do list today. If you get frustrated at any point, take a break from the tasks at hand. Remember, if you don’t complete all these steps today, you’ll have plenty of time to catch up. (The linky for prizes opens on March 18 and doesn’t close until March 31.)

Personally, I need some motivation on a day like today. Can I suggest giving yourself a little reward—perhaps some chocolate—after each step? : )

Installing the Zipper

Zipper installation may be new to you. I’ve installed bunches of zippers, and they still intimidate me.

If you have a zipper foot for your machine, you could use it here. It will allow you to get your line of stitching closer to the teeth of the zipper. I actually don’t have one for my main machine (a Janome 1600P-QC) and am able to install the zipper in this project without it.

For me, it’s hard to keep all the layers together when sewing a zipper. Wonder Clips help a lot. I also use Steam-A-Seam 2. It’s double-sided fusible webbing that’s just a quarter inch in width.


If you want to give Steam-A-Seam a try, here’s how to use it:
  1. Pinch off a piece long enough to run the length of the canvas you cut for the zipper gusset.
  2. With your fingers, press the webbing, paper side up, along one long edge of the canvas. The heat from your hands will keep it in place for the moment.
  3. Pull back the paper to reveal the second sticky side and place your zipper over it, aligning the edge of the zipper with the edge of the canvas. (In the picture above, the zipper isn’t in place yet.)
  4. Press the zipper with your iron to fuse it to the canvas.
  5. Add the other layers, per Anna’s instructions, and secure with Wonder Clips. (See picture below.)
  6. Sew with a quarter inch seam allowance, and press per Anna’s instructions.
  7. Repeat on the other side of the zipper with the second piece of canvas you cut for the zipper gusset.

Sewing the Tabs

If you’re adding zipper tabs to your bag, you should stop after Step 3(b) and follow these instructions:
  1. Take a scrap of coordinating fabric that’s 4 inches by 7 inches, and press it in half lengthwise.
  2. Open it up. Fold each long raw edge in toward that center line and press.
  3. Now fold the piece in half lengthwise along the original fold and press again, with starch.
  4. Edge-stitch along both long edges.
  5. Cut the piece in half so that you have two pieces, each 1 inch by 3½ inches.
  6. Fold each piece in half width-wise (they’re both 1 inch by 1¾ inches now), basting one to each edge of the zipper. (See pictures below.) 
Here I’m folding the raw edges in toward the original center fold.

To keep the open zipper end together, I basted it with a few stitches.

Wonder Clips work better for me in this step than pins.

Here is a zipper tab, all basted in place.

Making the Handles

I really like the way Anna constructs the handles in this pattern. I used quilting cotton for my handles, and I followed her instructions to the letter.

A few notes on the handle-making front: If you find working with a 44-inch piece of fabric unwieldy, cut yours into two 22-inch pieces instead. I do recommend starch to get good, crisp folds that will help you sew neat lines of top stitching along the length.

Also: I suggest sewing those lines of top stitching along the length from the outside in. In other words, sew one on the open side on the right and then sew one on the left. Keep alternating right and left. That way, if your spacing doesn’t work out perfectly, it will still be symmetrical. (Read through to the bottom of the post for more detail on that.)

I pressed my raw edges in toward the seam between the main handle fabric and
the accent fabric.

I do use the extra strip of canvas that Anna mentions, for added structure.

Pins work best for me in this step. I will start by sewing the open edge, which
is on the top here. Then I’ll sew the edge on the bottom and work my way
inward, alternating sides.

It worked out that my lines were perfectly spaced, so the fact that I alternated
the sides as I sewed didn’t matter.

If you are using a home dec fabric for your handles and the bulk seems too much for the handles to lie nicely, I recommend using just one fabric, modeling the construction after the zipper tabs:
  1. Cut a 7-inch by 44-inch piece of your home dec fabric.
  2. Fold it in half lengthwise and press.
  3. Open it up, fold the long raw edges in toward the center line, and press.
  4. Fold the piece back again along the original fold and press with starch.
  5. Sew along the length of the handle, starting at the open long edge and alternating between sides.
Here are my handles for Cargo Duffle #2, made with Amy Butler home dec fabric. Notice that my line spacing wasn’t perfect, but because I sewed those lines from the outside in, they are still symmetrical.


If you have any questions or comments, the best way to share them with me and everyone else sewing is to use the comments below, but you can also email me at frombolttobeauty (at) gmail (dot) com or DM me through Instagram.

Document your progress on Instagram using the hashtag #cargodufflesewalong!

Related Links:
Main Cargo Duffle Sew-Along Page
Sew-Along Day 1: Cutting the Pattern Pieces
Sew-Along Day 2: Making the Cargo Pockets
Sew-Along Day 3: Quilting and Assembling the Exterior Panels
>Sew-Along Day 4: Making the Gusset, Tabs, and Handles<
Sew-Along Day 5: Assembling the Bag and Installing the Snaps
Sew-Along Day 6: Lining the Bag
Prize Linky 


Follow on Bloglovin